Single-component and two-component seam isulation
seam isulator is available in two forms, single-component and two-components. These seam isulation are suitable for isulating kitchen floors, bathrooms and any surface such as ceilings, terraces made of mosaic or tiles, ceramics and stone.
seam isulator is available in two forms, single-component and two-components. These seam isulation are suitable for isulating kitchen floors, bathrooms and any surface such as ceilings, terraces made of mosaic or tiles, ceramics and stone.
Uses and applications of Single-component and two-component seam isulation
For sealing without the need to destroy structures that have been damaged by water intrusion
Filling the joints of tiles, ceramics, stone and mosaics have become empty due to the passage of time
Repairing decay or cracking of the floor due to the use of acidic and chemical substances
To connect all types of tiles, ceramics, stones and mosaics used in facades and floors
Features and benefits of Single-component and two-component seam isulation
Resistant to acidic and alkaline detergents
One hundred percent sealing of the desired seam and surface and more adhesion of tiles, stone or ceramics
Penetration to the depths of the structure
High durability
Resistant to acidic and alkaline detergents
One hundred percent sealing of the desired seam and surface and more adhesion of tiles, stone or ceramics
Penetration to the depths of the structure
High durability
Single-component and two-component seam isulation
Unlike traditional methods like bitumen and isogam, applying acrylic COUPSYL®LS-HARDENER
is simple and requires no special tools or skills. The process generally involves 3 key steps:
In sealing joints of single-component, old or new isulation joints or repairing damaged isulation , add 200 ml of water to this product and mix well to obtain a uniform paste, then close.
The final drying time is 24 hours after use, do not pour water on the relevant surface until the final drying time.
In the case of two-component , new or damaged joints, add the second component to the first component and mix well to obtain a uniform dough, then make the seam.
The final drying time is 24 hours after use, do not pour water on the relevant surface until the final drying time.
If the seam is intact, this solution is only used for antacids, chemical resistance and sealing. In this way, after cleaning and drying the joints completely, put the liquid on the seam in two stages. (Washable after 12 hours.)
This product should be stored indoors and away from direct radiation at a temperature of 5 to 35 degrees Celsius.
This product, as mentioned, is offered to the market in two forms: single-component (weighing 400 grams) and two-component (weighing 700 grams).
Need more info?