COUPCOAT® NAC is a water-based, glossy nano-acrylic coating designed for both interior and exterior building surfaces. Made with advanced acrylic resins and special additives, it is non-yellowing, highly water-repellent, and easy to clean.
The COUPCOAT® AWC product is a waterproof coating made from elastomeric and acrylic polymer materials. It prevents water penetration as well as overheating of roofs and various surfaces. This insulation can be applied on rooftops, rain-exposed façades, and a wide range of surfaces including metal, concrete, mosaic, asphalt, wood, and more.
Nano acrylic coating or COUPCOAT®NAC is a glossy water-repellent coating with nanotechnology for all types of building surfaces, which is based on acrylic resins and is water-based. Due to the use of acrylic resins and special additives in this product, it has no yellowing and this product has a high easy cleaning property.
COUPCOAT®NAC creates a transparent layer on all types of building surfaces, causing gloss, self-cleaning, impermeability and no efflorescence on them.
due to the wash ability of this coating and the very good adhesion of this product, it can be used as a coating for all types of building surfaces, especially external surfaces such as building facades.
This product also covers cracks and surface roughness due to creating a layer on the surface. For this reason, in addition to being usable in the exterior of the building, it is also used in the interior of the building.
To cover all types of building surfaces
Water based and environmentally friendly
Completely colorless and shiny
Lack of yellowing and very high weather stability
Extremely anti-stain and clean
Suitable abrasion resistance
High adhesion strength
Easy to run
Water based and environmentally friendly
Completely colorless and shiny
Lack of yellowing and very high weather stability
Extremely anti-stain and clean
Suitable abrasion resistance
To cover all types of building surfaces Water based and environmentally friendly Completely colorless and shiny
Lack of yellowing and very high weather stability Extremely
anti-stain and clean Suitable abrasion resistance
High adhesion strength Easy to run
COUPCOAT® NAC is used to cover a variety of exterior facades of the building as well as to cover the interior facades of the building.
Step 1: Prepare and clean the surface from any dirt, grease, efflorescence and dust
Second step: uniform application of the COUPCOAT®NAC on the desired surface by brush, rollers and …
The product of nano acrylic coating COUPCOAT®NAC of building surfaces is marketed in 1 liter and 20 liter containers.
COUPSYL® LS-HARDENER is offered in 4 liter and 20 liter containers. Due to the absorption of atmospheric carbon dioxide by this substance, they must be kept in the main containers in the form of seals.
is used to cover a variety of exterior facades of the building as well as to cover the interior facades of the building.
To cover all types of building surfaces
High adhesion strength
Easy to run
Appearance
Colorless and transparent liquid
Resin Type
Acrylic with nano additives
PURITY
% 98
pH
7
Appearance
|
Colorless and transparent liquid
Resin Type
|
Acrylic with nano additives
PURITY
|
% 98
pH
|
7
Frequently asked
questions
Find clear answers to common questions about application, performance, and technical details so you can choose with confidence.
COUPCOAT® NAC is a water-repellent coating based on pure acrylic resin. It has excellent weather resistance and can be used on various interior and exterior building surfaces. It appears as a milky liquid, has a purity of ≥ 98%, and a pH of about 8. The product is highly stable under normal conditions and shows very high UV resistance.
When working with COUPCOAT® NAC, it is recommended to wear chemical-resistant gloves to prevent skin irritation. Avoid direct contact with eyes and skin, and avoid inhaling spray mist. If the product comes into contact with skin or eyes, it may cause moderate irritation and should be washed off immediately with plenty of water.
Eye contact: Rinse eyes with plenty of water for at least 15 minutes and seek medical attention.
Skin contact: Wash the affected area immediately with plenty of water and remove contaminated clothing. Seek medical care if irritation persists.
Ingestion: Do not induce vomiting. Seek immediate medical attention.
Although the product is water-based and non-flammable, it can make surfaces slippery if spilled.
COUPCOAT® NAC is a high-performance nano hydrophobic coating based on pure acrylic resin, designed to provide long-lasting water repellency and surface protection for various construction materials.
This advanced acrylic coating creates a protective hydrophobic layer that reduces water penetration, protects surfaces against environmental damage, and improves durability in both interior and exterior applications.
Due to its excellent weather resistance, UV stability, and water-repellent properties, COUPCOAT® NAC is an ideal solution for protecting concrete, cement-based surfaces, stones, and other building materials.
A nano hydrophobic coating is an advanced protective coating technology designed to make surfaces repel water and moisture.
By creating a low water absorption surface, hydrophobic coatings help prevent:
COUPCOAT® NAC utilizes acrylic resin technology to create a durable protective layer with excellent resistance against environmental conditions.
The main feature of this nano hydrophobic coating is its ability to reduce water absorption and protect surfaces from moisture penetration.
COUPCOAT® NAC provides excellent resistance against ultraviolet radiation, making it suitable for outdoor applications exposed to sunlight.
The coating maintains its performance under different weather conditions and helps increase the service life of construction surfaces.
After application, the coating preserves the original appearance of the surface while creating a protective hydrophobic barrier.
The pure acrylic resin structure provides strong adhesion, stability, and long-term protection.
COUPCOAT® NAC can be used as a nano hydrophobic coating for building surfaces, including:
Protect concrete structures against moisture absorption and environmental factors.
Improve water resistance and durability of cementitious surfaces.
Provide hydrophobic protection while maintaining the natural appearance of stone materials.
Suitable for protecting different architectural surfaces against humidity and weather conditions.
Choosing the right nano hydrophobic coating is important for improving surface durability and reducing maintenance costs.
COUPCOAT® NAC offers:
| Property | Description |
|---|---|
| Product Type | Nano Hydrophobic Acrylic Coating |
| Base | Pure Acrylic Resin |
| Appearance | Milky Liquid |
| Purity | ≥98% |
| pH | Approximately 8 |
| Application | Interior and Exterior Surfaces |
| Main Function | Water Repellent Surface Protection |
Before applying COUPCOAT® NAC:
Nano hydrophobic coating is a protective surface treatment that creates water-repellent properties and reduces moisture penetration.
COUPCOAT® NAC can be used on concrete, cement-based materials, stones, and various interior and exterior building surfaces.
Yes, this acrylic-based nano hydrophobic coating provides excellent UV resistance and weather durability.
COUPCOAT® NAC is designed to protect surfaces while maintaining their original appearance.