Seam insulator comes in single- and two-component types, suitable for waterproofing kitchens, bathrooms, ceilings, terraces, and surfaces made of mosaic, tile, ceramic, or stone.
Seam insulator comes in single- and two-component types, suitable for waterproofing kitchens, bathrooms, ceilings, terraces, and surfaces made of mosaic, tile, ceramic, or stone.
Seam insulator comes in single- and two-component types, suitable for waterproofing kitchens, bathrooms, ceilings, terraces, and surfaces made of mosaic, tile, ceramic, or stone.
For sealing without the need to destroy structures that have been damaged by water intrusion
Filling the joints of tiles, ceramics, stone and mosaics have become empty due to the passage of time
For sealing without the need to destroy structures that have been damaged by water intrusion
Filling the joints of tiles, ceramics, stone and mosaics have become empty due to the passage of time
Repairing decay or cracking of the floor due to the use of acidic and chemical substances
One hundred percent sealing of the desired seam and surface and more adhesion of tiles, stone or ceramics
Penetration to the depths of the structure
High durability
Antibacterial (antimicrobial) and anti-algae and anti-moss surface
Prevent the accumulation of dirt under the surface of tiles, stones or ceramics as a result of bad odor
One hundred percent sealing without damage at the lowest cost
One hundred percent sealing of the desired seam and surface and more adhesion of tiles, stone or ceramics
This product should be stored indoors and away from direct radiation at a temperature of 5 to 35 degrees Celsius.
In sealing joints of single-component, old or new isulation joints or repairing damaged isulation , add 200 ml of water to this product and mix well to obtain a uniform paste, then close.
The final drying time is 24 hours after use, do not pour water on the relevant surface until the final drying time.
In the case of two-component , new or damaged joints, add the second component to the first component and mix well to obtain a uniform dough, then make the seam.
The final drying time is 24 hours after use, do not pour water on the relevant surface until the final drying time.
If the seam is intact, this solution is only used for antacids, chemical resistance and sealing. In this way, after cleaning and drying the joints completely, put the liquid on the seam in two stages. (Washable after 12 hours.)
This product, as mentioned, is offered to the market in two forms: single-component (weighing 400 grams) and two-component (weighing 700 grams).
Penetration to the depths of the structure
Resistant to acidic and alkaline detergents
To connect all types of tiles, ceramics, stones and mosaics used in facades and floors
High durability
Frequently asked
questions
Find clear answers to common questions about application, performance, and technical details so you can choose with confidence.
Each 600-gram two-component package can cover 4 square meters.
Since joint-sealing waterproof grout is mostly used for household purposes, it is offered in 600-gram two-component and 450-gram single-component packages.
This product is designed for sealing joints between ceramic and tile surfaces to prevent water from penetrating to lower floors.
(Brick and mosaic absorb water, so using this waterproof grout on them will not be effective.)
Need more info?