COUPSYL® LS-HARDENER is a clear, lithium-based liquid that deeply penetrates concrete to react with calcium and magnesium salts, sealing pores and capillaries. It prevents the penetration of water, oil, steam, and gases, removes efflorescence, and increases the concrete’s density. As a result, treated surfaces gain higher abrasion resistance and much lower permeability.
COUPSYL® LS-HARDENER is a clear, lithium-based liquid that deeply penetrates concrete to react with calcium and magnesium salts, sealing pores and capillaries. It prevents the penetration of water, oil, steam, and gases, removes efflorescence, and increases the concrete’s density. As a result, treated surfaces gain higher abrasion resistance and much lower permeability.
Being Lithium-based and high penetration power
Fully absorbent and penetration power up to 5-10 mm in concrete
Being water-based and with petroleum solvents (environmentally friendly)
Heat resistant to temperature up to 400 ° C
Absorption of free lime and efflorescence control strength
Ability to filling pores and capillaries and microscopic concrete, stone and brick ducts
Ability to increase the concrete density
Restoring old concrete surfaces and further strengthening
Water repellent concrete
No participate in an Alkali-silica reaction of concrete
Glazing old and new concrete surfaces (glossy, anti-wear and impermeable)
Making concrete floors hygienic
Water repellent concrete water tanks and elevator shafts
Water repellent of building facades, cement cladding of bricks and tiles – ceramics
Anti- efflorescence and waterproofing primer before concreting and repairing concrete
Increasing abrasion resistance and dust repellent of old concrete surfaces
Increasing the hardness of concrete surfaces and floors
Polishing and dust proofing concrete floors
Prevents the growth of fungus, moss and lichen on the surface
Increasing the hardness and impermeability of gypsum , cement and concrete floors
Polishing and reducing the permeability of floors on which dry concrete or mortar has been applied.
Suitable cover for concrete floors of various industrial and semi-industrial environments, parking lots and sheds and warehouses
To preserve the color and protect all types of decorative concrete surfaces and stamped concrete without the possibility of scaling and permanent life
Lithium concrete hardener COUPSYL®LS-HARDENER
Lithium silicate concrete hardener can be applied to the surface with a low-pressure pump (spraying pump) or a brush without the need for dilution. But depending on what concrete surface (concrete, stone, and brick) is applied and also what application it has, performing method can be a little different. (For more information, refer to this product manual file.)
Keep in a sealed container, dry and low light environment at a temperature of 15-40 degrees Celsius. In case of contact with skin, wash immediately with plenty of water. Immediately see a doctor if swallowed. This solution is free of hazardous evaporative and non-flammable materials.
Storage: keep in closed plastic containers separate from acids, reactive metals and ammonium salts at a temperature of 15-40 ° C. It should not be stored in aluminum, copper, brass, zinc or galvanized containers.
COUPSYL® LS-HARDENER is offered in 4 liter and 20 liter containers. Due to the absorption of atmospheric carbon dioxide by this substance, they must be kept in the main containers in the form of seals.
Improve the abrasion resistance of concrete surfaces
Permanent durability and stability
Prevent negative water pressure
Nonflammable
This substance is a colorless and odorless liquid. It causes moderate eye irritation,
moderate skin irritation, digestive system irritation and dust irritates the respiratory
system. Due to the high pH of this product, in case of leakage to surface water, it
will damage aquatic animals. If spilled, it will cause the surface to slip. It reacts
with acids, ammonium salts, reactive metals and some organic compounds.
. Eye contact: This product moderately irritates the eyes.
. Skin contact: This product moderately irritates the eyes.
. Inhalation: This product irritates the respiratory system.
. Eating: This product causes burning of the mouth, esophagus and stomach.
. Physical hazards: This product causes the surface to slip.
Clear liquid
Physical appearance
≥ 99
Purity
13-14
pH
13 ± 0.5 wt. %
Solid percentage
Physical appearance
|
Clear liquid
Purity
|
≥ 99
PH
|
13-14
Solid percentage
|
13 ± 0.5 wt. %
Frequently asked
questions
Find clear answers to common questions about application, performance, and technical details so you can choose with confidence.
When working with COUPSYL® LS-HARDENER, you should wear chemical safety goggles, protective clothing, chemical-resistant gloves, and rubber boots. These prevent irritation to the eyes and skin and protect against accidental splashes.
For eye contact, rinse the eyes with plenty of water for at least 15 minutes and seek medical attention.
For skin contact, wash the affected area with plenty of water and remove any contaminated clothing or shoes. Medical care may be needed if irritation persists.
This product should be stored in sealed plastic containers at 15–40°C, away from acids, reactive metals, and ammonium salts. It must not be stored in containers made of aluminum, copper, brass, zinc, or galvanized metal to avoid dangerous reactions.